7112-05-3 Vapor Tension Panel-Thermometer mit Frontflansch. 40 / 240 ° F / C
Cooper-Atkins Modell 7112-05
The Cooper-Atkins 7112-05-3 features a front flange which is designed for flush mount applications. The sensor is connected at the back. It has three (3) .156" diameter mounting holes equally spaced on 2.625" diameter bolt circle. This panel mount thermometer has a 2.5" dial diameter and 48" capillary length. The dual scale temperature range is 40 to 240 °F and 10 to 115 °C.
Had a faulty part and replacing it was easy fast service.
The gauges are off on both the thermometers I bought by about 10 degrees, plus the needle will not go below 80 degrees no matter how cold it is outside. I placed them on the front face of my new smokehouse above the boors, the vapor bulbs are inside the smokehouse at the same level the meat would be at. I placed another thermometer that I know works next to the vapor bulb and tested. I them adjusted these thermometers to the same as the inside unit at 100 degrees. After the smokehouse cooled and the inside thermometer was at 65 degrees these units both stayed at 80 degrees. And when I heated the smokehouse up to 100 these units only read 90.